X CLOSE
X CLOSE
- Home
- About Oly-Ola
- Our Guarantee
- Frequently Asked ?s
- Paver Restraints
- Landscape Edgings
- Low-Profile Edgings
- Accessories
- Displays
- Installation & Tips
- About 'Plastic' Edging
- Upcoming Events
- Office Hours
- Photo Gallery
- Submit Photos
- I am a Distributor
- Order Online
- Request Samples
- Testimonials
- Newsletter Sign-Up
- Employment
- Contact Us
Unlike no other edging on the market, Super-Edg features a 6 inch deep low-profile design that makes it ideal for a variety of landscape applications, such as: defining flower beds, forming logos and patterns and can be used above ground at the base of fences to save time and money while string trimming. Super-Edg's heavy-duty, 100% recycled PVC construction makes it safer and more economical than metal edgings. Super-Edg is manufactured with pre-cut slots for staking and they are spaced every 2 feet. Oly-Ola provides 1 stake for every 2 holes with your purchase. If your design is elaborate or has lots of joints/curves, we recommend purchasing extra stakes. Super-Edg is made with high grade, recycled PVC, with no fillers or blown in materials. It is made to last!
Specifications
Black rigid polyvinyl chloride (PVC) and carbon black concentrate
Material:
5 pieces per flat bundle
Packaging:
20 feet of edging, 5 steel stakes and 1 connecting H-clip
Each Piece Includes:
6 inches
Height
Dimensions:
20 Feet
Length
.115 to .130 Inches
Thickness
8.6 lbs
Per piece
Approximate Weight:
43 lbs
Per 20’ bundle
Also available in 100 ft. & 10 ft. lengths
OVERLAP METHOD (for joining pieces)
1. Using a hacksaw, cut both pieces of edging leaving a stake slot 3” from the end. Apply PVC cement to both sides of the edging, front and back.
2. Use the connecting H-clip that comes with the edging to join the two sections. Do this quickly before the glue sets.
3. Drive the 14” steel anchoring stake through both sections using the pre-cut slots until the stake cannot go any deeper.
For connecting lengths together, H-clips are provided that can be fixed in place using PVC cement.
Since Super-Edg is made of true PVC, it can be heated with a propane or mini butane torch and then bent to form 90 degree corners and other angles. Be sure to practice your technique on scrap pieces before applying it in the field.
Our custom steel stake
10-12” Landscape spikes may also be used if additional holes are drilled
10-12” Landscape spikes may also be used if additional holes are drilled
INSTALLATION GUIDELINES
Edging: Dig a trench 6 inches deep along the lawn or bed edge. Place the edging in the trench and anchor it with stakes as indicated above. Use the provided connecting clip when joining two lengths of edging together and be sure to use the connecting method pictured above.
Staking: Place a stake through the pre-cut slots parallel to the edging. The stake should be pounded until it will not go any further due to the width of the slot. Additional holes can be drilled to allow for extra stakes or spikes when securing joints and curves. Do not make the mistake of using too few stakes, especially when the ground is exposed to cold temperatures.
