Quick Search

Black JackTM
4.75 inch garden edging - 1 inch round top bead / single v-lip wall anchor

An alternative to Oly-Ola’s popular Black Edg-KnightTM style, Black JackTM is the industry’s best of the single 'v-lip' edgings. Without compromising quality, this edging was designed to be slightly smaller, making it a more economical option to help you win those close bids.

Black JackTM is also available in a boxed and rolled version which includes 4 non-bending steel stakes and 1 crosslock connector. It is ideal for independent retail nursery and garden centers that want to carry a high quality, pre-packaged edging for their customers.

Black JackTM is made with 100% recycled, high grade polyethylene, without fillers or blown in materials. It is made to last!

Available in 20 ft. lengths, 10 ft. lengths or 20 ft. roll

Connector = Crosslock

The Black JackTM connector is not universal. Be sure to verify the product stamp says 'Jack' before attempting to use with this edging. Learn More

garden edging connector - Oly-Ola Jack


Category:  Landscape Edging, Lawn Edging, Round Top Edging, Bed Divider

INSTALLATION GUIDELINES

BASICS:

Dig a trench 5 inches deep along the lawn or bed edge. Place the edging in the trench and anchor it with stakes as indicated above. Use only Oly-Ola’s exclusive crosslock connector when joining two lengths of edging together and be sure to use the overlap method pictured below.

STAKING:

Pound a stake through the edging wall every 4 feet at a 45 degree angle. The stake should be installed at about the midway point of the wall. Pound the stake through the edging but be sure to leave 2 inches undriven to allow for resistance on both sides of the wall. Use extra stakes when securing joints and curves. Do not make the mistake of using too few stakes, especially when the ground is exposed to cold temperatures.

JOINING:

Our unique crosslock connector is provided exclusively by Oly-Ola with all of our round top style edgings, except Trim-LineTM. The fit of this connector can be adjusted by rotating it. When looking at the connector’s end, it appears as a ‘+’. Inserted into the edging as a plus sign, this will give it a tighter fit. Rotate the plug 45 degrees and insert the plug as an ‘X’ and you will get a slightly looser fit.

connection-bad
* Avoid weak and unsightly joints by using the overlap method (see below), and by using Oly-Ola’s tight fitting, effective connector.

OVERLAP METHOD (for joining lengths): Guard Against Gapping and Frost Heave

black-jack_connect1
1. Cut off a 4 inch section of the round bead on one of the edging pieces and a 4 inch section of the v-lip on the other piece with a metal snip, utility knife or saw.
black-jack_connect2
2. Use our exclusive crosslock connector to join the two sections, while overlapping the two pieces of edging.
black-jack_connect3
3. Drive 1 or 2 steel anchoring stakes through both sections at a 45 degree angle toward the turf or outside portion of the bed.

Specifications

Packaging: 20 foot - 5 pieces per flat bundle
10 foot - 5 pieces per flat bundle
Boxed 20 foot roll (Includes 4 Stakes & 1 Connector)
Material: Pure medium density polyethylene and 4% carbon black concentrate. With a melt factor under 2
Average Wall Thickness: .07 - .09 inches
Dimensions Per Piece: Length: 20 ft. Height: 4.75 in.
Dimensions Per Box: 23.25 in. X 23.5 in. X 6 in.
Features: 1 in. round top bead
Single 'v-Lip' wall anchor
Can be Formed with Heat: Yes - heat gun or propane torch (No Contact)
Connection Type: Jack/Knight Connector (Sold Separately)
Staking: Through edging wall at 45° angle using nail or Oly-Ola’s 9.25 inch stake (Sold Separately)
Approx. Weight: 20 ft. piece: 5.6 lbs.
20 ft. bundle: 28 lbs.
10 ft. piece: 2.5 lbs.
10 ft. bundle: 12.5 lbs.
Pack - 6 Rolls: 48 lbs.
Skid - 32 Rolls: 294 lbs.


Landscape Architects:   Please use our (800) 334-4647 phone number on all specifications.
This will allow us to help the contractor bid the job properly.
For pricing information call or email us