5 inch landscape edging - 1 inch round top bead / 4 groove wall anchor
And, as with all Oly-Ola landscape edgings, Edg-KingTM is made with 100% recycled, high grade polyethylene, without fillers or blown in materials. It is made to last!
Available in 20 ft. lengths or 10 ft. lengths
Connector = Crosslock
The Edg-KingTM connector is not universal. Be sure to verify the product stamp says 'King' before attempting to use with Edg-KingTM lawn edging. Learn More
Dig a trench 5 inches deep along the lawn or bed edge. Place the landscape edging in the trench and anchor it with stakes as indicated above. Use only Oly-Ola’s exclusive crosslock connector when joining two lengths of edging together and be sure to use the overlap method pictured below.
Pound a stake through the landscape edging wall every 4 feet at a 45 degree angle. The stake should pierce the edging at about the midway point of the wall. Pound the stake through the edging but be sure to leave 2 inches undriven to allow for resistance on both sides of the wall. Use extra stakes when securing joints and curves. Do not make the mistake of using too few stakes, especially when the ground is exposed to cold temperatures.
Our unique crosslock connector is provided exclusively by Oly-Ola with all of our round top style landscape edgings, except Trim-LineTM. The fit of this connector can be adjusted by rotating it. When looking at the connector’s end, it appears as a ‘+’. Inserted into the edging as a plus sign, this will give it a tighter fit. Rotate the plug 45 degrees and insert the plug as an ‘X’ and you will get a slightly looser fit. Always join edging lengths together using Oly-Ola's overlap method (pictured below) to ensure a seamless joint that will withstand the test of time. See the how-to video here.
* Avoid weak and unsightly joints by using the overlap method (see below), and by using Oly-Ola’s tight fitting, effective connector.
OVERLAP METHOD (for joining lengths): Guard Against Gapping and Frost Heave
|Packaging:||20 foot - 5 pieces per flat bundle|
10 foot - 5 pieces per flat bundle
|Material:||Pure medium density polyethylene and 4% carbon black concentrate. With a melt factor under 2|
|Average Wall Thickness:||.09 - .105 inches|
|Dimensions Per Piece:||Length: 20 ft. Height: 5 in.|
|Features:||1 in. round top bead|
4 groove horizontal wall anchor
|Can be Formed with Heat:||Yes - heat gun or propane torch (No Contact)|
|Connection Type:||King Connector (Sold Separately)|
|Staking:||Through edging wall at 45° angle using nail or Oly-Ola’s 9.25 inch stake (Sold Separately)|
|Approx. Weight:||20 ft. piece: 6.8 lbs.|
20 ft. bundle: 34 lbs.
10 ft. piece: 3 lbs.
10 ft. bundle: 15 lbs.