Quick Search

Edg-KingTM
5 inch landscape edging - 1 inch round top bead / 4 groove wall anchor


Introduced in 1978, Edg-KingTM was the first true professional grade landscape edging. Still Oly-Ola’s finest round top edging, Edg-KingTM features four horizontal grooves on its anchoring wall which eliminates frost heaving problems and helps keep the edging in the ground. You need not worry about kinking or the additional labor costs that go along with it. Edg-King is arguably the best plastic landscape edging on the market.  Where others fail, Edg-KingTM succeeds.

And, as with all Oly-Ola landscape edgings, Edg-KingTM is made with 100% recycled, high grade polyethylene, without fillers or blown in materials. It is made to last!

Available in 20 ft. lengths or 10 ft. lengths

Connector = Crosslock

The Edg-KingTM connector is not universal. Be sure to verify the product stamp says 'King' before attempting to use with Edg-KingTM lawn edging. Learn More

Landscape Edging Connector - King


Category:  Landscape Edging, Lawn Edging, Plastic Edging, Bed Divider

Landscape Border - Edg-King by Oly-Ola
INSTALLATION GUIDELINES

BASICS:

Dig a trench 5 inches deep along the lawn or bed edge. Place the landscape edging in the trench and anchor it with stakes as indicated above. Use only Oly-Ola’s exclusive crosslock connector when joining two lengths of edging together and be sure to use the overlap method pictured below.

STAKING:

Pound a stake through the landscape edging wall every 4 feet at a 45 degree angle. The stake should pierce the edging at about the midway point of the wall. Pound the stake through the edging but be sure to leave 2 inches undriven to allow for resistance on both sides of the wall. Use extra stakes when securing joints and curves. Do not make the mistake of using too few stakes, especially when the ground is exposed to cold temperatures.

JOINING:

Our unique crosslock connector is provided exclusively by Oly-Ola with all of our round top style landscape edgings, except Trim-LineTM. The fit of this connector can be adjusted by rotating it. When looking at the connector’s end, it appears as a ‘+’. Inserted into the edging as a plus sign, this will give it a tighter fit. Rotate the plug 45 degrees and insert the plug as an ‘X’ and you will get a slightly looser fit. Always join edging lengths together using Oly-Ola's overlap method (pictured below) to ensure a seamless joint that will withstand the test of time. See the how-to video here.

connection-bad
* Avoid weak and unsightly joints by using the overlap method (see below), and by using Oly-Ola’s tight fitting, effective connector.

OVERLAP METHOD (for joining lengths): Guard Against Gapping and Frost Heave

How to Connect Lawn Edging 1 - Edg-King by OlyOla
1. Cut off a 4 inch section of the round bead at the top of one of the lawn edging pieces with a metal snip, utility knife or saw.
How to Connect Lawn Edging 2 - Edg-King by OlyOla
2. Use our exclusive crosslock connector to join the two sections, while overlapping the two pieces of lawn edging.
How to Connect Lawn Edging 3 - Edg-King by OlyOla
3. Drive 1 or 2 steel anchoring stakes through both sections at a 45 degree angle toward the turf or outside portion of the bed.

Specifications

Packaging: 20 foot - 5 pieces per flat bundle
10 foot - 5 pieces per flat bundle
Material: Pure medium density polyethylene and 4% carbon black concentrate. With a melt factor under 2
Average Wall Thickness: .09 - .105 inches
Dimensions Per Piece: Length: 20 ft. Height: 5 in.
Features: 1 in. round top bead
4 groove horizontal wall anchor
Can be Formed with Heat: Yes - heat gun or propane torch (No Contact)
Connection Type: King Connector (Sold Separately)
Staking: Through edging wall at 45° angle using nail or Oly-Ola’s 9.25 inch stake (Sold Separately)
Approx. Weight: 20 ft. piece: 6.8 lbs.
20 ft. bundle: 34 lbs.
10 ft. piece: 3 lbs.
10 ft. bundle: 15 lbs.

Plastic Lawn Edging  - Professional Grade Edg-King by Oly-Ola

Landscape Architects:   Please use our (800) 334-4647 phone number on all specifications.
This will allow us to help the contractor bid the job properly.
For pricing information call or email us.